螺母的例句（螺母在句子中的用法）

• She has invented a nifty little gadget for undoing stubborn nuts and bolts. 她发明了一种灵巧的小工具用来松开紧固的螺母和螺栓。
• The machines start to wear down, they don't make as many nuts and bolts as they used to... 机器开始出现磨损，螺母和螺钉的产量不如从前了。
• The machines start to wear down, they don't make as many nuts and bolts as they used to. 机器开始出现磨损，螺母和螺钉的产量不如从前了。
• Stainless steel bolts and nuts shall be tightened on manhole covers. 人孔盖使用不锈钢螺栓和螺母拧紧.
• Tighten valve adjusting screw locknut to 27 N · m ( 20 lb - ft ). 将气门调节螺丝防松螺母拧紧至27牛顿·米 ( 20磅 - 尺 ).
• Recheck clearance on all valves again after locknut is tightened. 防松螺母拧紧后,再对所有气门的间隙重新检查一次.
• Recheck clearance again after tightening locknut . Readjust clearance as necessary. 拧紧防松螺母后,再一次检查间隙,视需要重新调节间隙.
• There are lots of advantages by cold extrusion for straight knurl nut in a single process. 直纹滚花螺母采用冷挤压一次成形新工艺,成效显著.
• Manufacture LIFTING EYEBOLT , HIGH STRENGTH HEX NUTS , T - BOLT, U - BOLT and SPECIAL FASTENERS. 制造吊环螺丝,高强度螺母, T 型螺丝 、 U型螺丝等非标螺丝.
• Insert the pin into the collet and tighten the collet nut. 把小棒插入夹头,拧紧夹头螺母.
• Abnormity nut need three sets of mould take shape. 异形螺母需要三副模具才能成形.
• ...nuts and bolts that haven't been tightened up. 没有拧紧的螺母和螺栓
• If you want to repair the wheels you just undo the four nuts. 如果你想修理轮子，只需拧开这4个螺母就行了。
• Remove wheelnuts, let down tyre, put on spare. 拧下车轮螺母，放掉车胎的气，换上备用胎。